Out of stock
SKU
YUNEECLR

Yuneec Q500 Antenna Boost

FPVLR Antenna Booster

1 x u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz rc control antenna)

1 x u.fl to rp-sma female cable (rg-178) 20 cm long for 5.8GHz wi-fi antenna (video)

1 x  2.4GHz Half Sphere helix 9dBi LHCP (to extend rc range)

1 x 5.8GHz  LHCP 4.25 turns 5.8ghz helix antenna (to extend wi-fi/video range)

$121.00

This kit is designed for all Yuneec quadcopters using the ST-10 and ST-10+ controller for ranges of 4,000 ft unboosted.

What is included in this kit:

1 x u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz rc control antenna)

1 x u.fl to rp-sma female cable (rg-178) 20 cm long for 5.8GHz wi-fi antenna (video)

1 x  2.4GHz Half Sphere helix 9dBi LHCP (to extend rc range)

1 x 5.8GHz  LHCP 4.25 turns 5.8ghz helix antenna (to extend wi-fi/video range)

It’s VERY important to aim these antennas correctly.

*To aim them correctly , you need to think of the long helix antenna as if it were the barrel of a gun and you are trying to shoot your drone down aiming at it with the gun.. that’s how you obtain the max distance, although aiming angles of +- 40 degrees can be used with a bit of a loss of signal strength. Please rotate the the antenna array in a way that it’s not pointing up at the sky but rather it’s pointing in front of you towards the horizon so  you can aim at the copter with it.

Please note: Flying outside line of site is not permitted in Australia unless you have the correct qualifications an have applied for an exemption.

We sell these upgrade kits as it allows for a stronger signal, which means less chance of a drop out when flying in areas with interference.

The above price is just for the antenna unit

Write Your Own Review
You're reviewing:Yuneec Q500 Antenna Boost
To Top